Who Will Become Wealthy in the Information Age?

As you know, we’re now well and truly in the
Information Age. It began about 10 years ago. In fact,
many economists say it began in 1989, with the Fall of
the Berlin Wall (and the start of the World Wide Web).

To understand who will become wealthy in the
Information Age, first we need to understand how the
Information Age differs from the Industrial Age (born
about 1860, died about 1989).

In fact, let’s get a complete overview and go back to
the Agrarian Age.

In the Agrarian Age, society was basically divided
into two classes: the landowners and the people who
worked on the land (the serfs). If you were a serf,
there wasn’t much you could do about it:
land-ownership passed down through families and you
were stuck with the status you were born into.

When the Industrial Age arrived, everything changed:
it was no longer agriculture that generated most of
the wealth, but manufacturing. Suddenly, land was no
longer the key to wealth. A factory occupied far less
land than a sheep farm or a wheat farm.

With the Industrial Age came a new kind of wealthy
person: the self-made businessman. Wealth no longer
depended on land-ownership and the family you were
born into. Business acumen and factories were creating
a new class of wealthy person. But it still required
enormous capital to build a factory and start a
business.

Then came the World Wide Web (in about 1989) and
globalization. Suddenly, everything changed again.

Factories (or real estate) were no longer necessary to
run a business. Anyone with a website could start a
business. The barriers to wealth that existed in the
Agrarian Age and the Industrial Age were completely
gone. People who could never have dreamed of owning
their own business were making millions from their
kitchen table.

Of course, the Information Revolution didn’t begin
in 1989.

It began in 1444 when Gutenberg invented the printing
press in Mainz, Germany.

But the printing press (newspapers, magazines,
paperbacks) belonged to the Industrial Age, not the
Information Age.

The printing press is a ‘one-to-many’ technology. The
Internet is a ‘many-to-many’ technology. And that was
what changed in 1989.

The Industrial Age was about centralization and
control. The Information Age is about
de-centralization and no control. No government and no
media magnate controls the Internet. This is the
crucial thing to understand about the Information Age.

As we moved from the Agrarian Age through the
Industrial Age to the Information Age, there’s been a
steady collapse of the barriers that kept one section of
society wealthy and the other section poor.

In the Information Age, literally anyone can become
wealthy.

So now that we have a clearer picture of how the
Information Age differs from the Industrial Age, let’s
ask that question again: ‘Who will become wealthy in
the Information Age?’:

(1) People Who are Self-Taught

To explain this better, let’s go back to the Agrarian
Age and the Industrial Age, and the   Transmission  of
Skills.

In the Agrarian Age, skills were passed on from father
to son. If you wanted to learn how to be a blacksmith
you had to be a blacksmith’s son. If you wanted to
learn to be a stone-mason, you had to be the son of a
stone-mason.

With the coming of the Industrial Age, all this
changed. You could go to University and learn whatever
skills you wanted. Knowledge was freely available.

But in the Information Age, the  Transmission  of Skills
is changing once again.

The skills necessary to succeed in the Information Age
are not being learnt from our parents (as in the
Agrarian Age), nor are they being learnt in schools
and colleges (as in the Industrial Age). Children are
teaching their parents computer skills. And many of
the entrepreneurs who start hi-tech Internet companies
have never been to college.

The millionaires (and billionaires) of tomorrow
probably won’t have a college education. They will be
high-school drop-outs, self-taught people.

(2) People with New Ideas.

Again, it’s the people who are able to think outside
of the existing structures who will become wealthy in
the Information Age. Often, it’s just a Simple Idea
that launches people to success in the Information
Age.

Take Sabhir Bhatia, for example – the man who invented
Hotmail. Bhatia was a computer engineer working in
Silicon Valley. He had no previous business
experience, whatsoever.

But one day, while he was driving back from work, a
friend called him on his cell phone and said that he
had an idea: What about starting a free, web-based
email service? Bhatia knew this was the idea he’d been
waiting for. He told his friend to hang up immediately
and ring him at home on a secure line.

Three years later he sold Hotmail to Microsoft for
$400 million.

(3) Writers

The third group who will become wealthy in the
Information Age are Writers.

In the Industrial Age, Writers depended on large
publishing Houses to get published (remember that the
printing press is an Industrial Age technology – it is
centralized and controlled). And the Publishing Houses
took the lion’s share of the profits.

In the Information Age, Writers are doing their own
publishing – and keeping most of the profits
themselves. Indeed, Writers are flourishing on the
Web – mainly through eBooks and Ezine Articles.
But even if you don’t write eBooks or Ezine Articles,
if you own a website, you are a Writer.

Why?

Because the Internet is basically a written medium. It
favors writers, people who are able to communicate
effectively through the written word. Remember, it’s
not the graphics on your website that sell, it’s the
words you use.

In the Information Age, we’re all Writers!

The Club of Rome and Education

The Club of Rome:

Eugenics is a lot like all the other arrows in the quiver of the social engineer. Francis Fukayama’s book The End of History and The Last Man is a powerful reminder of how much ‘absolute religions’ are mere tool for the elite, and I think everyone should read what he bluntly states. In order to design or engineer a quality environment we must have ethics or principles that allow decisions to be made that benefit all life on earth rather than a few elites who operate to benefit their cronies and share a little with their paladins in some Physiocratic ‘trickle down’ approach to the governance and resources or opportunities that humanity has the duty to fulfill according to some over-riding purpose. That purpose might be divine but it must make sense and be commonly apprehended or shared. I happen to think there is an intelligence and collective conscious design. I also think we are part of this design and can make mincemeat or a thorough botchery of it. We are individually responsible for being like gods as Jesus (John 10:34) and all so many adepts have made eloquently apparent. We are part of God and should help she/he/it achieve what is RIGHT.

Is that an elitist attitude? Maybe it is at some point, because I am not one who caters to the destruction of the human gene pool or one who thinks anyone deserves a free ride at the heart of it. That is not to suggest that I think everyone should not be enabled and encouraged far more than has been done in the WASP world of history in the last two millennia and more. I probably share more with Thomas Paine and his New World Order types than I share with bleeding heart naïve do-gooders who seek something they have not fully examined. I think helping babies exist and take food from the mouths of others in India was not a godly or good thing, for example. The Club of Rome and I share a great deal in terms of how we view the opportunities and problems that our leaders must address. Here is a good point they make.

“Systems of education are less and less adapted to the new issues, to the new emerging global society we are presently involved in. New priorities force us to redefine the role of education, which should be conceived as a permanent learning process.   Transmission  of knowledge is no longer sufficient, and new objectives such as developing one’s own potential and creativity, or the capacity of adaptation to change are becoming essential in a rapidly changing world.

The Club of Rome considers that education is both part of the global problematique and also an essential tool to become an effective actor in control of one’s own life and within society. If there are “Limits to Growth”, there are “No Limits to Learning” (titles of two Reports to the Club of Rome).” (1)

Their recommendations to limit population growth can be seen from many points of view but their prognostications of doom and gloom have not considered various technologies which continue to make it possible that the outcomes their reports have predicted will occur. In fact there are technologies I think they are not even aware of if you go by what they say on their web site. There is no reason to limit population growth if we enable all people to fulfull their potential. However, that certainly is not being done and the number of people who know their soulful potential to any real extent if less than one per cent.

Genital Herpes Symptoms and Treatment

Genital herpes is one of the most common sexually transmitted diseases in the world today. It is caused by the herpes simplex virus.  This is the family of viruses that causes cold sores, shingles, and chicken pox. 

Genital herpes is caused by infection with the herpes simplex2 virus (HSV2). HSV1 is the virus that causes cold sores on the lips and nose area. The herpes virus, however, is not too particular about the mucous membrane it calls home and will happily live in either the mucous membranes of the mouth and lip area or the reproductive tract.  Because of this, oral genital contact can spread either HSV1, HSV2. Viral transmission can occur from the mouth to the genitals or from the genitals to the mouth. The blister type lesions caused by either virus are virtually identical.

Genital Herpes Symptoms

Sometimes after the initial infection there may be fever and general malaise as could be seen with any acute viral infection but this is not always apparent in all cases.  In fact the symptoms of a genital herpes infection may not be known to you until you see some blisters on or around your genital area. 

This is called an outbreak and is characteristic of the way the herpes virus acts in the body. There will be periods when the virus is dormant and none of the characteristic symptoms of genital herpes are present.  Then there will be these outbreak periods where blisters appear in the genital area and may even extend to the anal area. 

The blisters will act like any normal cold sore on the lips.  They come up with an initial tingling, then grow larger and spread and eventually burst leaving an ulceration that will slowly heal on its own.

In men these blisters occur on or around the penis.  In women the blisters may actually be in the vagina as well as on the surrounding genital area. 

Symptoms of genital herpes will come and go but the virus stays with you forever. The number of outbreaks will gradually become less and less and in some cases, some people do not see outbreaks at all.   

Diagnosis

You may not know you have contracted genital herpes until the first breakout of the blisters. Symptoms of genital herpes are so mild in some people they think they just have a skin irritation.  The best thing to do is to be checked by a doctor so that you can get diagnosed properly. 

Doctors can usually make the diagnosis based on inspection of the genital area as the lesions are quite specific in appearance.  In some instances the doctor may take a swab on the blister fluid to see if it contains the virus.

Genital Herpes Treatment

There is no cure for genital herpes, however, it can be controlled so that you can live a normal sexually active life.  Anti-viral medications are often prescribed at the first outbreak to knock back the infection and may be used for prolonged periods if outbreaks are frequent.

Other treatments for the discomfort of an outbreak are common sense measures such as wearing loose comfortable clothing, using cold compresses or soothing creams and ointments on the blisters.

A strong and healthy immune system is needed to keep the virus suppressed and to reduce the frequency of outbreaks. Health denying habits such as smoking, drug use, or toxic relationships will drain the resources of your immune system so your best method of treatment is to maintain good health.  This would include eating whole nourishing foods, getting plenty of exercise, and managing stress. 

Complications

Generally the herpes simplex virus is not considered a dangerous infection to persons who have a fully functioning immune system. The virus will be suppressed and outbreaks will not be common as long as the immune system is functioning well.

However, if the immune system becomes burdened or compromised in any way then outbreaks will be more likely to occur.  This may happen during times of physical or emotional stress.  If the immune system is comprised by other more serious illnesses such as HIV or cancer then the herpes virus can become more dangerous.

If the virus is directly transmitted to other areas such as the eyes, or the brain, complications can be very serious. This direct transmission can happen in a number of ways but the most common is during the birth process.  The infant can become infected with the virus from contact with the mother’s vagina during birth.

If you suspect you may have contracted a genital herpes infection see your doctor as soon as possible.  Never have sex during an outbreak and never have unprotected sex. This means using a condom  (either male or female type)  during every sexual encounter even during oral sex. 

Additionally you should always inform your partner of your herpes status.  This is always the right thing to do.

Victory Motorcycle Shift Ratchet Replacement

The Victory Motorcycle is a very well built piece of machinery. I have owned a Victory Kingpin since 2004. I have had no problems with the motorcycles and am very pleased with my motorcycle. This article will address the one issue I did have that is related to a failed shifter part. The dreaded Victory Shift ratchet.

One day while riding, I began experiencing downshifting problems my kingpin. It only happens from time to time and it feels like it is hanging up when i am trying to downshift. I have adjusted the clutch cable and changed the oil with no resolve. I am running full synthetic AMSOIL 20W50 motorcycle oil in the transmission and was thinking the oils was too thick for the clutch plates. After changing the oil to the Victory OEM multi-blend synthetic, the problem with shifting still existed.

I decided to take a few more test rides to diagnose the problem. I did notice that if i push the shift ratchet shaft in (has about 1/8 inch movement in and out) it seems to temporarily stop the problem. I went to the Victory Motorcycle Solutions community site and have read people talk about shift ratchet as being the culprit. after reading several posts on this information, I contacted my favorite Victory motorcycle dealership, Santa Rosa VeeTwin. They confirmed that I need to replace the shift ratchet. The reason being the rest spring fails over time.

The Victory dealership explained that Victory changed the ratchet somehow after 2000 due to hard shifting complaints. They also stated that they have seen more issues like this with those Victory riders with driver floorboards. The drivers with floor boards will typically do a lazy shift. Anyhow the ratchet will be worn on both ends, thus allowing the shifting to continue down and not engaging.

Being that I am handy with a wrench and always up for a challenge, I ordered the OEM replacement parts from Victory. I needed to get the shift ratchet and new transmission gaskets. I have the Victory Kingpin service manual but it did not explain exactly how to do this shift ratchet replacement. So I took my time and video taped everything.

The basics steps involved in doing this shift ratchet replacement is as follows:

1 – Drain all of the oil out of your Victory Motorcycle. Trust me, I did not do this and made a huge mess when I removed the transmission cover.

2 – Remove all of the transmission cover bolts.

3 – Now the hard part, pull of the transmission cover. Note the clutch magnet is very strong and will not want to give up the cover too easily. Pull straight out and watch your fingers.

4 – Once the cover is off and the remaining oil spills out, observer how the shift ratchet is positioned. Note this by taking a picture or video taping it. You will need to install the new shift ratchet in the same position with the star wheel engaged correctly.

5 – Do the replacement and not clean off the old transmission cover gasket and install the new one. This is a must to prevent leakage.

6 – Install the transmission cover. Again be mindful of the magnet, this will suck the cover right on and take off your finger if you are not paying attention.

7 – Install the cover bolts evenly and check torque settings.

8 – Fill the bike up with AMSOIL full synthetic 20W50 V-Twin motorcycle oil.

9 – Start the bike and check for oil leaks.

10 – If all looks good, test ride the bike and see how wonderful it is to have the shifter working again.

You are now one of the few and proud Victory motorcycle owners to go through this incredible maintenance activity.

Using Power Tools 101

The power tools of today are not the same as the ones that were carefully placed on the pegboard near your grandfather’s workbench- they are actually quite far from it. Modern technology has made amazing advances in the simplest of features, including automatic shut-off, enhanced guarding and more resilient materials just to name a few. But one trait has come to be worth its weight in gold within the power tool industry, and that’s the owner’s manual.

Today’s manuals not only have better graphics showing its users what each part of the device should look like (and what to do when it doesn’t), many individual manufacturers will have explicit directions and instructions for the safety and maintenance of each individual power tool. Of course, no instructions are completely fool proof, especially if the content of such manuals isn’t completely understood by the user. This is why many manufacturers have implemented training seminars and classes for both companies and individuals on the proper procedures for optimum performance and safety. Local home improvement stores often hold such classes and seminars on a regular basis.

However, a bit of common sense and know-how never hurt anyone, so there are a few safety guidelines which should be followed by all users of power tools. For example, wearing the proper clothing is essential, and you should never wear loose clothing that could easily get caught in a power tool. Safety gear is crucial- hard hat, safety goggles and gloves, along with the proper footwear. Using the right tool, whether it be size or something else, for the job at hand, including the right type of extension cord (indoor, outdoor, proper length) if applicable. The work area should be clean, uncluttered and well lit. Keep all electric tools away from water and flammables. Do not use power tools with frayed or damaged cords. Damaged parts anywhere in a power tool, including saw blades and drill bits, can cause damage to the tool itself or the individual performing the task. Unplug all electric power tools when finished with or before changing to another tool.

As far as the maintenance aspect of such power tools, common sense is again of the highest importance. For example, making sure that the proper guards are placed on saw blades when not in use is both a safety and maintenance issue. Saw blades need to be sharp to deliver the best performance possible, but can also be incredibly dangerous, so taking the proper preventive measures will yield the best results in all aspects, not just project outcome.

For more information on power tool basics, the U.S. government has many publications that can be of high value to consumers. The U.S. Consumer Product Safety Commission offers product recall information, and OSHA has a few such publishings regarding both general industry and personal use of power tools.

Finding Gas Scooter Parts

From time to time pretty much any vehicle will break down or have mechanical issues and need to be fixed – that’s a given. This is true of electric or gas scooters and motor bikes. This can get expensive, especially if you have to pay for both the parts and the labor. If you are mechanically inclined, you might be able to fix a lot of problems on your own, as long as you know what is wrong with your scooter and what parts are needed to fix it.

There are many ways to get gas scooter parts. You can always go the easy route and take the bike to a mechanic, who will be able to both get the necessary parts and fix the bike. This is probably the most expensive way to go however. You can also go to a parts store and see if they have whatever you need. They may or may not have it, but most times they will be willing to order it for you.

The easiest thing to do might just be to go on the internet and order the part from the comfort of your own home. There are a number of websites that sell scooter parts, and most make it easy for you to locate just the right part. They allow you to search by the part or by the make and model of your bike so that you can make sure you choose the right thing. You might have to pay a shipping charge, but if you find the parts on sale somewhere you could end up saving money even with the shipping.

Whether you need a starter or a part for your   transmission , you can find what you are looking for on the internet. Even if you don’t have one of the new models of gas scooters or electric bikes, you are likely to be able to find what you need with a little bit of searching. Searching the internet is much easier than going to a lot of different parts places looking for what you need, so this is probably the best way to go if you want to purchase the parts to do a repair on your own.

Getting Your Motorcycle Ready For the Upcoming Riding Season

It’s getting close to the time of year when we all start looking forward to the upcoming riding season that’s just around the corner. So if you live in an area where you’ve had to store your bike for the winter, it’s time to start thinking about getting it ready to go.

Even if you live in an area where you don’t have to “mothball’ your bike for several months, it’s a good idea to run through a checklist of things that will help prevent problems and keep your riding time hassle free.

Basically, at the start of every riding season you want to do is the same stuff that’s required on a 500-mile service. All the fluids should be drained with new added including your front end and brake master cylinders. When you check your brake fluid, if it looks old, thick and brown, it’s time to replace it.

By addressing all of the items included in a 500-mile service procedure, this will give you the opportunity to get reacquainted with your motorcycle and put you in a position to check all the little things you might otherwise overlook. Obviously, the more you stay on top of your maintaining motorcycle, the more you stay away from the repairs that can end up costing big bucks!

Gas Tank and Air Filter: If you haven’t ridden your bike for several months and you didn’t take the time to drain the fuel out of the gas tank and carburetor float bowl, drain out the old fuel and put some fresh gas in before you fire it up. Don’t start a motor up with fuel that’s been sitting around all winter. You may want to also consider replacing the fuel line and filter because it’s been sitting around with “stale” gasoline in it and more than likely is a problem waiting to happen. Besides, a new piece of fuel line is pretty cheap insurance.

While you are inspecting the carburetor and the other fuel system components, it’s a good time to clean up the air filter area and check the air filter element. It should be removed and cleaned up or replaced especially if some form of life decided to move in for the winter make it a home.

Fluids: No matter what, the engine oil needs to be drained and replaced along with installing a new oil filter specific to your model motorcycle. When checking the oil levels on FLT and Dyna model motorcycles, don’t forget that they need to be sitting over on the kickstand. The other models need to be sitting up straight.

Remove the   transmission  drain plug and drain out the  transmission  fluid. Make sure that you clean up the magnetic plug before you reinstall it, replace the O-ring and then pour in the proper amount of  transmission  fluid. Remember when you are checking the fluid level in the  transmission  to keep the bike sitting up straight.

One of the more important things that needs your attention is the battery. If the battery is older than 2 years, and you have not had it hooked up to some sort of battery maintainer, don’t even screw around just replace it! You can bet when you least expect it (especially in the heat of summer) that bugger will let you down.

While you are doing all of this service work, it doesn’t hurt to throw in a set of new spark plugs. Check the gap and adjust them as necessary, put a little anti-seize on the threads and DO NOT over torque them. Take a look at the plug wires and clean up the boots real good or replace them if they’re starting to look heavily worn.

Cables and Belts: Check the clutch cable for free travel and lube the pivot pin and the cable. The cables should be removed and cleaned up real good at least once a year, but if you’ve stayed on top of maintaining them, you probably don’t need to. The same things go for your throttle cables and remember to use the proper product for this application. Do NOT use WD 40!

Do a real good visual inspection on your drive belt. Make sure the alignment is correct and that you’ve got proper adjustment while keeping an eye out for any holes or fraying of the belt. This could lead to some problems down the road that will more than likely happen in the most off the wall places and I can tell you from experience, there is no easy roadside fix for a broken drive belt.

If you’re like most riders, you’ve probably never changed your fork oil. To get the best performance out a front end, the fluid should changed once a year regardless of what kind of miles you put on the bike. Also don’t think if you’re running a Springer you can simply ignore any sort of front-end maintenance. There are several items that need to be inspected and maintained on them, so check your manufacturers service manual.

After you’ve gone through all of these items, start the engine and let it warm up nice and easy with out revving it up. If you own an earlier model Evo, you may experience oil running out of the breather tube when you first start it up, but don’t get shook up because this can happen if the bike has been sitting around for a while. The oil will bleed down into the bottom end and when you start the bike up, that oil will get pushed out the breather tube.

After the bike is all warmed up, check the idle speed and do whatever adjustment is necessary. Check the kill switch to make sure it’s working OK and you should be set on all the basic stuff. Also, it doesn’t hurt to change the engine oil and filter again after you run it about 500 miles.

Addressing these basic items can really save you a lot headaches while on the road and help insure a hassle free riding season.

Bloodborne Pathogens – Preventing Disease Transmission

Imagine receiving a call that an employee has been injured from a fall down a flight of steps at your facility. The caller tells you that 911 has been called and some of your fellow employees are tending to the victim. As a supervisor, you decide to respond to the scene.

You arrive just as firefighters and paramedics take over caring for the victim. These rescuers do their job well – the victim is stabilized, wrapped up for transport to the hospital and gently placed on the stretcher.

As you watch, you can’t help but notice that the firefighters and paramedics are wearing medical gloves and goggles. As EMS (emergency medical services) personnel leave the area, you approach the employees who helped to thank them for their efforts. Almost immediately you become aware of a very frightening sight – both of the rescuers have fairly large spots of blood on their clothing and, even more upsetting, both are using paper towels to wipe the blood off of their hands. It is obvious that these employees did nothing to protect themselves from disease transmission and both have been contaminated with the victim’s blood.

Wearing PPE (personal protective equipment) is an important part of professional rescuers’ equipment. They know that protecting themselves from bloodborne pathogens is, in some ways, just as important as caring for the victim. But what about your people – do they know the risks associated with not wearing protective equipment?

If your company provides first aid kits for employee use or if your employees are required to respond to a medical emergency, they should have access to protective equipment and receive training on bloodborne pathogens.

ASSESS YOUR OPERATION’S RISK FOR EXPOSURE – I was recently asked to evaluate exposure risks for an association of tow truck operators, body shop technicians and auto mechanics. These people lacked training on bloodborne pathogens.

Tow truck operators wear thick, leather work gloves and routinely pick up bloodstained windshields or wrap contaminated airbags around steering columns. Body shop technicians pull contaminated seats from wrecked vehicles and then sit on them during their breaks or at lunchtime. Mechanics have a tendency to cut their knuckles or foreheads while repairing vehicles. They also share tools with fellow employees – tools that are contaminated with blood from their last injury.

I know you’re not in the automobile repair business. The examples above are intended to get you thinking about your own operation’s risks of exposure to potentially dangerous body fluids. Do you have a first responder team or people assigned to respond to an emergency? Are first aid kits available to employees? Do employees share equipment or tools that could become contaminated? Who is responsible for cleaning up body fluids after an accident or injury?

Without proper communication policies and training in preventing disease transmission, your employees could find themselves exposed to the same dangers paramedics and firefighters face while coming to their aid.

So what can you do to reduce the risk of exposure? Let’s start with defining bloodborne pathogens and the impact that exposure to them can have on employees and employers.

CONTAMINATION PREVENTION GUIDELINES – Bloodborne pathogens are pathogenic microorganisms that are transmitted via human blood and cause disease in humans. They include – but are not limited to – hepatitis B and human immunodeficiency virus (HIV).

I know for many people (myself included) words like microorganisms, immunodeficiency and pathogens bring back thoughts of high school and health classes – the last places in the world most of us want to revisit. So before we go any further, let me put it in my terms: There’s a lot of junk out there that can make us very sick, or even kill us if we become contaminated.

We need to constantly be on guard and be very careful so that we don’t become contaminated. I’ve been teaching CPR and first aid training for over 25 years, and I’m often asked if I would do rescue breathing without a barrier on someone I do not know. I respond without hesitation: If I found someone unresponsive and not breathing, I would immediately call for help and begin chest compressions on the victim, but there is no way I would do mouth-to-mouth on the individual without a breathing barrier.

Emergency responders know the risks associated with coming in contact with bloodborne pathogens, and they know how to protect themselves. Unfortunately, far too many people in the workplace or good Samaritans on the street do little, if anything, to take the necessary precautions. Too often they realize they’ve been exposed to body fluids after the emergency, when it’s too late to do anything about it.

EMPLOYEES – Here are a few simple rules to follow when faced with the possibility of exposure to bloodborne pathogens, or any body fluids for that matter. This information is presented as guidelines for both employees and employers. The American Heart Association calls it “Making a PACT, Know How to Act.”

PROTECT – Protect yourself from blood or blood-containing materials. This includes wearing protective equipment such as gloves and goggles and using a breathing barrier if you are performing CPR. Consider your options if you find yourself with no protective equipment.

ACT – If you find you have come into contact with another person’s blood or other body fluids, act quickly and safely. Wash the area immediately with hot, soapy water for up to a minute before rinsing. If your eyes have been contaminated, flush them with clean water for up to five minutes. If a flushing agent is not available at the scene, have someone get water for you. Firefighters or paramedics can assist you if they are still at the scene.

CLEAN – After an emergency, especially in the shop area or office, clean any areas contaminated with blood or body fluids. Wear protective equipment. Clean the area with a solution of one part Clorox and eight parts water. Completely flush the area and let the solution stand for at least three minutes. Be careful when wiping up the area, especially if you are dealing with broken glass or wood or metal splinters. Put all soiled items, including soiled cleaning materials, in a plastic bag and take it to the dumpster as soon as you are finished. If there is an injection device (such as a needle) involved, try to give it to the medics or firefighters before they leave; otherwise, get it in the dumpster and use extreme caution while doing so.

TELL – Report the incident immediately to your supervisor or human resources department. Ask for a dated copy of the report (even if it is only handwritten).

EMPLOYERS’ RESPONSIBILITIES – Employers have a responsibility to protect their employees from exposure to bloodborne pathogens. Here are the specifics of this responsibility.

PERSONAL PROTECTIVE EQUIPMENT – Any employee at risk of being exposed to bloodborne pathogens must be provided with the protective equipment necessary to keep them safe from exposure. This equipment includes gloves, goggles and, if required, breathing masks or barriers for CPR.

EDUCATION – Not all professions require bloodborne pathogen education and prevention training.

A call to OSHA (Occupational Safety & Health Administration) may or may not give you the answer you are looking for. It appears as though OSHA looks at a number of factors when determining whether an employer does or does not have to comply. For example, if you offer voluntary CPR/first aid training to your employees, they may not be required to take bloodborne pathogen training. If you have designated first aid responders within your organization, you probably fall under the training requirements.

Many of you know your employees’ occupational exposure risk. If you have personnel who are routinely or even occasionally exposed to blood or body fluids in the execution of their duties, you may want to consider offering protective equipment and training to these employees.

ENGINEERING CONTROLS – Engineering controls help to protect employees from bloodborne pathogen contamination and prevent the spread of pathogens in the workplace. Here’s an example of engineering controls: An employee using his leather work gloves realizes he has come in contact with body fluids and the gloves are contaminated. Two controls should be in place to protect the employee. First, knowing his exposure risk, the employer should have a spare set of gloves on hand so that the operator can complete his job. Second, the company should have a procedure for disposing of or cleaning the soiled gloves.

WORK PRACTICES – Setting standard practices for preventing disease transmission is a very important part of an employer’s responsibility in protecting employees.

In the case of the body shop previously mentioned, good work practices would include establishing a policy requiring workers to wrap plastic around seats pulled from a wrecked vehicle and prohibiting them from sitting on the seats, even with the plastic cover in place.

Providing employees with their own toolboxes is another good practice. If they share tools, have a policy in place for cleaning and decontaminating tools, especially after an accident or injury. Moreover, make sure employees know the importance of disposing of or cleaning contaminated personal protective equipment.

Finally, offer a course in bloodborne pathogen training. It is an excellent way to communicate the importance of preventing disease transmission and protecting your company from a huge liability/workers compensation claim.

HAVE A WRITTEN POLICY AND REPORTING PROCEDURES IN PLACE – As I previously mentioned, implement policies related to bloodborne pathogens at your operation. Start small, then expand on the policies as new issues surface. Communicate with your people. Make sure they know the reporting procedures and the importance of reporting any possible contamination.

OSHA has templates for creating your own company bloodborne pathogens policy and/or procedure. Simply download the forms, fill in the blanks with your company name, etc., print them out and you’re good to go. Additional information can be obtained by calling your regional OSHA office.

TRAINING, POLICIES ARE WORTHWHILE INVESTMENTS – I am a business of one, but if I did have employees, I can assure you – they would be trained on bloodborne pathogen risks and contamination prevention, and my company would have a policy in place. It’s the right thing to do for a business, its employees and the employer. And just imagine how good it would feel to know that your operation is in compliance should OSHA officials decide to visit.

Invest an hour for setting up your program, distribute the information to your employees and arrange for a 30-minute bloodborne pathogen education and prevention class. The investment is small, but the dividends to you and your employees will be huge.

Porn Addiction May Deplete You From Life

Masturbation and explicit entertainment addiction are mutually related, and most addicts of both these habits don’t know where masturbation dependence comes to a close and smut enslavement starts. Numerous addicts get no delight from smut alone. The porn pictures fortify masturbation, and after that, masturbation gives the quite undeniable high that causes the fixation; and thus it goes round and around.

The sorts of pornography that addicts use as their resources to jerk off are various and range from standard photos and scenes to hentai drawings, animated cartoons to webcams and shooting themselves doing sexual acts and afterward stroking off to it. The quantity of genital climaxes of both genders changes per session. A few addicts can climax up to 15 times each day or more – consistently – relying upon how raised they are in their addiction.

Porn dependent youths in High School regularly need to go to the washroom to stroke off amid classes when compelled by urgent and over-the-top porn contemplations which actually command their brains. Like porn addicts of all ages, recollected pictures and recordings divert them from everything else. However, the addicts of all ages get surpassed regularly with the desire to utilize porn and jerk off regardless of the fact that they are not contemplating porn and can’t settle or capacity until they do.

At the point when explicit entertainment addicts attempt and quit porn, the considerations of things they have seen move round their brains like marbles and torment them. Recouping addicts can recall these pictures numerous years after they last utilized porn as a medication. Porn addicts frequently feel constrained by their dependence on jerk-off in broad daylight in public places. In case, they don’t jerk off during these circumstances, they frequently can’t adapt to the fractiousness and disturbance that accompanies the derivation of not having discharged routinely.

At the point when their life circumstance permits it, the porn addicts spend an entire day or days seeing porn. Amid these circumstances, the addicts portray feeling like ‘zombies’. They attempt to get relaxed, yet need to continue stroking off throughout the night until the time has come to get up and to go to work or school. It is extremely basic for porn addicts to have an example amid drinking sprees of being fixated on discovering certain sorts of porn pictures or scenes and can put in hours or even days looking for them.

The compulsion is like a parasite which destroys their life in entirety. They sense that they are in chains which they can’t get rid of. They are under the course of a severe impulse to get involved in porn over which they feel they have no control. Numerous addicts talk about feeling like they are always living in a boxing ring being beaten up by their dependence on erotic entertainment. Some depict it like being in a sand trap; whilst others say it is similar to suffocation.

Antenatal Classes – Pelvic Floor Exercises

Most of the pregnant women are probably hearing how important it is to have strong core muscle. If you have never come across core stability exercises, Pilates, Yoga and you are first time pregnant it is not easy to understand and start strengthening the muscle. Many pregnant women hear about the pelvic floor muscles and Kegel Exercise but not many are told where they are, how to find them and most importantly how to train them.

So let’s make it simple!

What is pelvic floor?

They are a sling of muscles that sits underneath the bladder and runs from the base of the spine (coccyx) to the pubic bone at the front.

What do they do?

The main purpose of your Pelvic floor muscles is to give your organs support and help to improve your bladder/bowel control and improve or prevent any leakage.

The pelvic floor muscles relax when you contract the bladder to let the urine out.

Why are they important for pregnant women and women who have children?

The pelvic floor muscles can weaken during pregnancy as they relax from the weight of the baby and a hormone called relaxin that softens the connective tissue of the pelvic structures in preparation for birth. During childbirth vaginal delivery may further weaken or stretch some of the supporting structures in the pelvis.

Can I do anything to help protect my pelvic floor from weakening?

Yes start your pelvic floor exercises straight away!

How do I know I am actually working my Pelvic floor muscles?

There are two ways to check that you are correctly contracting the pelvic floor:

Stop test

While going to the toilet you can try and stop the flow of urine, if you can then you are contracting the pelvic floor muscles correctly, but do not stop the flow of urine every time you go to toilet. This is a good way of seeing if you are exercising the correct muscles, but may cause problems with your bladder if you are doing the test more than once a fortnight. Remember this is a test and you must not exercise your pelvic floor muscle while urinating!

Squeeze test

You can also feel if your pelvic floor muscle is contracting by putting one or two fingers into your vagina whilst having a bath or shower. Tighten your muscles so they squeeze your fingers.

How often should I do my exercises?

Practice five pelvic floor exercise contractions five times a day

There are two types of pelvic floor exercises; low twitch and fast twitch. It is important that you do the slow twitch first and then the fast twitch each time you exercise your pelvic floor muscles.

Prepare to exercise:

Sit on a chair/toilet seat/toilet lid. Make sure your feet are flat on the floor and your legs slightly apart:

To perform the slow twitch exercises:

1. Close and draw up the muscles around the back passage as if you are trying to stop passing wind. Make sure you do not contract your buttock muscles whilst doing this.

2. Now close and draw up the muscles around the vagina, as though you are trying to stop the flow of urine.

3. Hold for a count of five, breathing normally and trying not to hold your breath.

4. Slowly relax and let go.

5. Repeat five times in total.

6. When you can repeat five contractions for five seconds, start to build up the hold to ten seconds, increasing by one or two seconds each time.

To perform the fast twitch exercises:

1. Pull up your pelvic floor muscles as before.

2. Hold for one second and relax.

3. Repeat five to ten times or until your muscles feel tired.

If you are performing slow twitch exercises and you find your muscles ‘let go’ too quickly and you cannot hold for a count of five then just hold them for as long as you can.

When performing pelvic floor exercises it is important NOT to:

1. Squeeze your buttocks together.

2. Bring your knees together.

3. Hold your breath.

4. Lift your shoulder/eyebrows/toe upwards.

5. Perform the exercises while urinating.

If you do any of the above then you are not contracting your muscles correctly.

Any other benefits of performing these exercises

Yes! For women, strong pelvic floor muscles can also mean increased sensitivity during sex and stronger orgasms.